Wharfedale Pro XO-206 (3 way stereo)

Wharfedale Pro XO-206 (3 way stereo)

The XO-206 is a crossover built for stereo tri amplified sound reinforcement systems. A simplified front panel layout and feature set takes the confusion out of complicated set ups. A completely intuitive interface with protective features means you can setup your system safely and easily. Both the XO-206 and XO-206X models are equipped with 2 inputs and 6 outputs, however the 'X' model uses balanced XLR connectors (as opposed to balanced 6.3mm Jack)

The XO-206 is a 3 way stereo analogue active crossover that allows for the most simple and safe setup of a tri-amplified system. The low/mid crossover frequency is sweepable from 60Hz to 1KHz providing an ideal frequency split between your subs and mid drivers and the mid/high crossover point is sweepable from 1KHz to 9KHz giving you enough range to effectively send an appropriate bandwidth to your mids and tweeters.

Emphasis has been placed on the safety of your rig with a switchable 40Hz 12dB/octave HPF to increase headroom and independent switchable soft limiting on each of the bands to protect your amp and speakers. To help fine tune the setup of your system there are mute switches for each of the bands and also independent polarity switching.

The XO-206 active crossover has independent output level control ranging from -infinity to +6dB, to assist you there are LED output meters and a simple input clip LED.

All inputs and outputs are on balanced TRS jacks and there is the inclusion of a mono summed LF output for using a mono subwoofer in a stereo situation. The XO-206 comes in a 1U 19” rackmount chassis and accepts mains power via an IEC connector.

Specifications