Điểm nổi bật dòng âm thanh hi-fi Quad S1
Quad S Series loudspeakers fulfil that objective admirably. Sporting a new ribbon treble unit aligned, through sophisticated crossover networks, to Quad’s advanced bass-midrange drivers, each and every loudspeaker in the range delivers all the nuances and passion of the original performance.
Just 285mm high, the Quad S1 incorporates a 100mm bass/mid cone and the new ribbon unit developed for the S Series is thoroughly modern, utilising the latest techniques and materials.
The ribbon itself is a sandwich construction, making it robust enough to handle high-powered amplifiers, and is fully immersed in a powerful magnetic field so that it accomplishes its dual role of being both the voice coil and the sound radiator.
This ribbon tweeter is aligned with Quad’s Kevlar-coned bass and midrange drivers through sophisticated crossover networks. While the standmount models use carefully tuned, rear-firing reflex ports to augment the bass, the floorstanders are unusual in incorporating three ABRs (Auxiliary Bass Radiators) in place of a port. These passive, rear-firing bass units support the main drivers to extend bass response down to 35Hz whilst maintaining an accurate and articulate rendition of the instruments.
>>>>Có thể bạn quan tâm thêm dòng âm thanh hi-fi: QUAD 11L2 hàng chính hãng 100%
Thông số kỹ thuật của loa hi-fi Quad S1
| General description |
2-way bookshelf speaker |
| Enclosure type |
Vented box loudspeaker |
| Transducer complement |
2-way |
| Bass / Mid driver |
4"(100mm)woven Kevlar cone |
| Treble driver |
12 x 45 mm True Ribbon |
| AV shield |
No |
| Sensitivity (2.83V @ 1m) |
84dB |
| Recommended amplifier power |
25-150W |
| Peak SPL |
96dB |
| Nominal impedance |
8Ω Compatible |
| Minimum impedance |
4.2Ω |
| Frequency response (+/-3dB) |
58Hz ~ 20kHz |
| Bass extension (-6dB) |
55Hz |
| Crossover frequency |
3.2kHz |
| Cabinet Volume (in litres) |
10.7L |
| Dimensions (H x W D) |
285 x 156 x (240 + 30) mm |
| Weight |
5.2kg |
