SME SERIES V-12 TONE ARM

Bảo hành:

Tình trạng: Còn hàng

Giá bán: 219.820.000đ / chiếc

Based on the multi-award winning Series V pick-up arm, the Series V-12 incorporates the same design and engineering that have made SME a byword for excellence. Coherent musical control is held over the entire frequency range in terms of tonal quality, stability and stereo imaging. Startling dynamic range, neutrality, structurally inert, the Series V-12 embodies every worthwhile feature in a pick-up arm.
The 12 inch tone-arm is pressure die-cast in magnesium complete with an Integrated headshell to eliminate tone-arm resonances in the audio spectrum and offers a 27% reduction in maximum angular error distortion over 9 inch models. Listening: the benefits of minimal tracking error and harmonic distortion are clearly revealed.

Series V-12 Dimensions  
A – Distance from pivot to stylus 308.80mm
B – Distance from pivot to turntable centre 295.60mm
C – Cartridge fixing centres 12.70mm
D – Offset angle 17.62°
E – Linear offset 93.47mm
F – Overhang 13.20mm
G – Height above mounting surface max. 87.90mm
min. 56.40mm
H – Height of record surface above mounting surface max. 55.90mm
min. 24.40mm
J – Depth below mounting surface 56.75mm
K – Radial clearance for balance weight 73.0mm

ADDITIONAL INFORMATION

BUILD
  • The 12in pressure die-cast tone-arm utilises the advantages of magnesium and exploits the reduction in maximum tracking error/distortion afforded by the greater arm length when compared with 9in models.
  • Stainless steel cross shaft, ground and thread ground. Carried in massive yoke on Ø10mm precision ball races. Axes at record mean level to minimise warp-wow.
  • Dynamic balance. Graduated vertical tracking force control applies up to 3.0g x 0.125g VTF through resonance controlled spring.
  • Stainless steel vertical shaft, ground and thread ground, with integral Ø16mm flange to couple shaft and yoke.
  • Ø23mm steel pillar, heat treated, ground and honed, carries two Ø17mm precision ball races, widely spaced to resist tilt.
  • Underslung weight housing corrects centre of gravity and provides non-reflective tone-arm termination.

Sản phẩm tương tự